SIC
close

CPLDs Devices Ics | Electronic Components Distributor

I. CPLD Devices: Versatile Solutions for Medium to Small-Scale Logic Design https://www.sic-components.com/cplds-complex-programmable-logic-devices
In electronic system design, Complex Programmable Logic Devices (CPLDs) serve as a critical bridge between simple logic circuits and complex systems, leveraging their flexibility, efficiency, and reliability. Based on EEPROM or flash technology, CPLDs integrate abundant logic resources such as macrocells and logic array blocks, supporting in-system programming (ISP) and boundary-scan testing (JTAG). This enables rapid design iteration without hardware modifications, significantly reducing development cycles.
Core Advantages:
Flexible Programmability: Easily configure combinatorial and sequential logic using hardware description languages (Verilog/VHDL) or graphical tools, with support for real-time debugging and on-site updates.
Cost-Effective Performance: Compared to FPGAs, CPLDs offer lower costs and power consumption for medium to small-scale logic designs (typically under 10k gates), eliminating the need for external configuration memory and simplifying system architecture.
Reliability and Stability: Non-volatile memory cells (e.g., EEPROM) ensure configuration retention during power outages, while industrial-grade devices operate reliably across a wide temperature range (-40°C to +85°C), ideal for harsh environments.
Rapid Time-to-Market: Integrated development toolchains (e.g., Altera Quartus, Xilinx ISE) support automatic place-and-route, accelerating prototype validation and mass production.
Typical Applications:
Industrial Control: PLC logic control, motor drive timing management, and sensor data preprocessing.
Communication Equipment: Interface protocol conversion (e.g., UART, SPI, I2C) and data link layer signal processing.
Consumer Electronics: Smart home control hubs, peripheral interface expansion, and display driver logic.
Embedded Systems: Microcontroller peripheral expansion, real-time state machines, and hardware encryption modules.

II. SIC Electronics Distributor: Your One-Stop Partner for CPLD Solutions https://www.sic-components.com/cplds-complex-programmable-logic-devices
As a leading global distributor of electronic components, SIC has deep expertise in CPLD technology, collaborating closely with top manufacturers like Altera (Intel), Xilinx, Lattice, and Microchip. We provide end-to-end services from device selection to system integration, empowering customers with efficient design and reliable delivery.
1. Comprehensive Product Portfolio for Diverse Needs
SIC’s inventory covers mainstream CPLD series to meet various application requirements:
High Performance: Altera MAX 7000 Series (e.g., EPM7160STI.g., EPM7160STI100-10N), supporting 5V in-system programming and JTAG boundary-scan, suitable for high-speed data processing with pin-to-pin delays as low as 5 ns and counter frequencies up to 175.4 MHz.
Low Power: Xilinx XC9500 Series, operating at 3.3V with real-time power optimization, ideal for battery-driven or portable devices.
Cost-Effective: Lattice ispMACH 4000 Series, offering 32 to 256 macrocells and mixed-voltage compatibility, perfect for entry-level designs and cost-sensitive projects.
Industrial-Grade Reliability: Microsemi A40MX Series, with radiation resistance and wide-temperature operation, suited for aerospace, industrial automation, and other high-reliability scenarios.
2. Authentic Products and Supply Chain Resilience
Factory-Direct Sourcing: 100% genuine components procured through authorized channels, accompanied by complete documentation (datasheets, RoHS certifications, batch test reports).
Inventory and Delivery: Global warehousing ensures in-stock items ship within 48 hours. For hard-to-find or obsolete components, we offer alternative solutions and customized procurement to mitigate supply chain risks.
Quality Assurance: Rigorous incoming inspections including electrical testing, package verification, and reliability trials ensure a 99.99% performance compliance rate.
3. Technical Support and Value-Added Services
Expert Selection Team: Tailored technical advice on logic resource evaluation, power consumption analysis, and pin compatibility to avoid design redundancy.
Development Tools: Free access to 原厂开发软件 (OEM development software), reference designs, and simulation models to accelerate code debugging and hardware validation.
Customization Services: Support for pre-programming, burn-in testing, and package customization (e.g., TQFP, PQFP, PGA) to meet special application needs.
After-Sales Assurance: 15-day no-questions-asked returns (unopened), lifetime technical support for quality issues, minimizing project risks.
4. Customer-Centric Service System
Engineer-Friendly Resources: Detailed device manuals, application notes, and video tutorials for quick onboarding, plus a technical forum for real-time problem-solving.
Enterprise Solutions: One-stop BOM quoting, volume discounts, and credit term support to optimize procurement processes and cost control.
Maker and Education Support: Low minimum order quantities and bundled development kits to empower innovative projects and educational practices.

III. Choose SIC to Unlock CPLD Design Potential https://www.sic-components.com/cplds-complex-programmable-logic-devices
Whether for rapid prototype iteration or stable mass production, SIC delivers professional expertise and reliable services to empower your projects:
Technical Excellence: Deep understanding of CPLD architectures (macrocell configuration, product-term expansion, clock management) to optimize timing and resource utilization.
Industry Experience: Proven track record serving telecom equipment manufacturers, industrial control vendors, and consumer electronics brands, with tailored solutions for sector-specific challenges.
Future-Ready Innovation: Stay ahead with the latest CPLD technologies, including low-power models for IoT edge computing, ensuring your designs remain competitive.
Start Your Efficient Electronics Design Journey with SIC
CPLDs are the "flexible neural hub" of modern electronic systems, and SIC is your ideal partner to connect with these core components. From selection to delivery, we leverage technology and service to transform your ideas into reliable products.
Visit https://www.sic-components.com/cplds-complex-programmable-logic-devices to explore our CPLD portfolio and solutions. Let every choice fuel your innovation with stability and precision.
SIC Electronics Distributor — Professionalism Ensures Reliability, Focus Drives Innovation.


https://www.sic-components.com/cplds-complex-programmable-logic-devices

banner

Hot Products

View More
  • 3398 Keystone Electronics

    3398 Keystone Electronics

  • PA0004C Chip Quik Inc.

    PA0004C Chip Quik Inc.

  • 923345-03-C 3M

    923345-03-C 3M

  • 33010 Capital Advanced Technologies

    33010 Capital Advanced Technologies

  • 6010 Capital Advanced Technologies

    6010 Capital Advanced Technologies

  • 3662-9 Vector Electronics

    3662-9 Vector Electronics

  • 1868 Keystone Electronics

    1868 Keystone Electronics

  • 5071 Keystone Electronics

    5071 Keystone Electronics

  • RM-PL0275 LulzBot

    RM-PL0275 LulzBot

  • 4617-3 Vector Electronics

    4617-3 Vector Electronics

  • BT65X65 BuildTak

    BT65X65 BuildTak

  • K32/M Vector Electronics

    K32/M Vector Electronics

Related Blogs

  • 2025 / 06 / 13

    STMicroelectronics STM32F446ZCT6 -Microcontrollers: A Comprehensive Guide

    The STMicroelectronics STM32F446ZCT6 is an ARM Cortex-M4-based MCU with FPU, running at up to 180 MHz. It features 256 KB Flash, 128 KB SRAM + 4 KB backup SRAM, and offers rich peripherals: USB OTG HS/FS, 2 CAN, 3 ADCs, 17 timers, and 20 communication interfaces. In LQFP144 package, industrial temp ...

    STMicroelectronics STM32F446ZCT6 -Microcontrollers: A Comprehensive Guide
  • 2025 / 06 / 09

    MC33887PNB NXP Semiconductors-Motor Drivers:A Comprehensive Guide

    The NXP Semiconductors MC33887PNB is a 5.0 A H - bridge power IC with integrated load current feedback. It operates across a 5.0 V - 28 V voltage range, features low RDS(on) (120 mΩ typical), and supports up to 10 kHz PWM. With functions like active current limiting and fault reporting, it ensures r...

    MC33887PNB NXP Semiconductors-Motor Drivers:A Comprehensive Guide
  • 2025 / 06 / 07

    A 16-bit Bus Transceiver: Why Choose the Texas Instruments SN74ACT16245QDLREP?

    The Texas Instruments SN74ACT16245QDLREP is a high-performance 16-bit bus transceiver. Designed for harsh industrial and automotive environments, it operates reliably from -40°C to +125°C. With its dual 8-bit non-inverting 3-state architecture, it enables efficient bidirectional data transfer. It of...

    A 16-bit Bus Transceiver: Why Choose the Texas Instruments SN74ACT16245QDLREP?
  • 2025 / 06 / 04

    XC7A200T-2FBG484I by AMD FPGAs: A Comprehensive Guide

    The AMD XC7A200T - 2FBG484I is a high - performance FPGA from the Artix - 7 series. It features 215,360 logic cells and 740 DSP slices, enabling complex logic and signal processing tasks. With a 2.9 Tb/s I/O bandwidth and support for interfaces like PCIe, it ensures fast data transfer. Using 28 - nm...

    XC7A200T-2FBG484I by AMD FPGAs: A Comprehensive Guide
  • 2025 / 05 / 30

    The Importance of Emi Filter Modules in Electronics

    Emi filter modules are designed to suppress and filter out unwanted electromagnetic interference that can arise from various sources such as electrical appliances, motors, and radio frequency signals. By incorporating Emi filter modules into electronic devices, manufacturers can ensure that their pr...

    The Importance of Emi Filter Modules in Electronics
  • 2025 / 05 / 29

    What is the BTS7960 Motor Driver?: A Comprehensive Guide

    The BTS7960 is a high - current half - bridge motor driver IC. It integrates a p - channel high - side MOSFET, an n - channel low - side MOSFET, and a driver IC in one package. With features like logic - level inputs, adjustable slew rate, and comprehensive protection against over - temperature, ove...

    What is the BTS7960 Motor Driver?: A Comprehensive Guide
  • 2025 / 05 / 27

    IXFK94N50P2 IXYS | Single FETs:A Comprehensive Guide

    The IXYS IXFK94N50P2 is an N - channel enhancement - mode power MOSFET. It features a fast intrinsic diode, dynamic dv/dt rating, and avalanche rating. With a low RDS(ON)≤55mΩ and low QG, it reduces power losses. Its low - inductance package enhances performance. Ideal for switch - mode power suppli...

    IXFK94N50P2 IXYS | Single FETs:A Comprehensive Guide
  • 2025 / 05 / 23

    Texas Instruments CD4541BE Timers:A Comprehensive Guide

    The Texas Instruments CD4541BE is a versatile programmable timer/oscillator IC designed for precise timing and clock generation. It supports both RC network (for cost-effective solutions) and crystal oscillator (for high-precision applications) inputs, with adjustable frequency division ratios (up t...

    Texas Instruments CD4541BE Timers:A Comprehensive Guide
  • 2025 / 05 / 22

    what is a Operational Amplifier? (Op-Amps): A Comprehensive Guide

    ​ An Operational Amplifier (Op-Amp) is a high-gain, linear integrated circuit (IC) designed to amplify the voltage difference between two input signals and produce a single output signal. It features two input terminals—an inverting input (−) where the output is phase-reversed, and a non-inverting ...

    what is  a Operational Amplifier? (Op-Amps): A Comprehensive Guide
  • 2025 / 05 / 20

    Adesto Technologies RM25C64DS-LTAI-B Memory:A Comprehensive Guide

    The Adesto Technologies RM25C64DS-LTAI-B is a 64Kbit serial EEPROM leveraging CBRAM technology, offering SPI interface compatibility (modes 0/3) with 10MHz fast read capability. Operating on 1.65V–3.6V, it features ultra-low power: 0.20mA active read, 0.7mA write, and 0.5μA ultra-deep power-down. It...

    Adesto Technologies RM25C64DS-LTAI-B Memory:A Comprehensive Guide
  • Daily average RFQ Volume

    2000+

    Daily average RFQ Volume

  • Standard Product Unit

    30,000,000

    Standard Product Unit

  • Worldwide Manufacturers

    2800+

    Worldwide Manufacturers

  • In-stock Warehouse

    15,000 m2

    In-stock Warehouse